Gerald O'Docharty ( (no email) ) Sun, 12 Apr 1998 11:13:19 -0400
There is a type of UFO (I have ctagorized various types based on propulsion method) I call the 'wheel' or 'ring' type which seem to operate on the priciple of an accelerated plasma within a ring. This plasma may consist of a vaporised metal which has a low vaporization temperature such as mercury or even tin. (remember the mercury whirlwind vimanas?). A particular old UFO story tells of what appeared to be a crippled craft with the appearance of a spoked wheel. It suffered an explosion but did not crash as it was rescued by a couple of similar craft. Debris from the explosion was recovered. There were fragments of a curved brass-like metal like sections of cylindrical curve. On the inside of the curvature the surface was pitted and charred. Also found were spatters of what had been a molten metal but now solidified which had the weight and appearance of tin. Another story relates of a similar shaped craft which was wobbling and emitted some of the metal like a rain before straightening up and leaving. The metal was collected and analysed to be an extremely pure grade of tin.
What if the ring section was a hollow toroid consisting of segments that could magnetically accelerate the metal vapor in a circular path much like a cyclotron?
-Gerald
> Rotation, whether energetic or physical/mechanical, if brought to > a sufficiently high velocity will minimize or repel the influx of > aether INTO mass. > > >From the Carr file; http://www.keelynet.com/gravity/carr1.txt > > > He said the same "free energy" which causes the earth to rotate > > on its axis and orbit around the sun will turn a machine he > > described as two cones joined at their circular bases. > > > > When the rotation of such a machine reaches a certain > > velocity relative to the earth's orbital velocity, Carr said, > > it will take off....<snip>..... > > > > The principle on which Carr said such circular motion machines > > would operate is that "any vehicle" accelerated to an axis > > rotation relative to its attractive inertial mass (the earth) > > immediately becomes activated by free space energy and acts as > > an independent force. > > Make the outside rim of your rotating mass move faster than the earth AT > IT'S EQUATOR and the object is no longer subject to the earth's aether > influx!!! > > This can be done mechanically, energetically or I think, using > VIBRATION. Aether influx must be a complex of waves, with one or more > dominant...by conjugating against these dominant waves at the right > frequency and phase, IMHO, you have gravity control with all its > attendant side phenomena. > > Years ago, I did some spreadsheet estimations of how fast a disc would > have to be spinning to exceed the earth rotation at the equator....3, 4 > 5, 8, 10, 20, 30 foot diameter disks....I'll have to dig up the > spreadsheet info, but I believe a 3 foot disk at about 50,000 rpm would > exceed the earths rotational velocity at the equator, based on 1,020 > miles per hour. That was Otis Carr's claim. > > But it is much easier to duplicate using a rotating magnetic field or > electrostatic, EM or acoustic field and WITH DENSITY, that is high > amplitude energies. links
