## The Holy Grail! FREE Energy Method.

How to align a magnet and a coil to work in unions. No drag, and the magnet speeds up as you pull current.

## The Holy Grail! FREE Energy Method.

How to align a magnet and a coil to work in unions. No drag, and the magnet speeds up as you pull current.

# The Holy Grail- FREE ENERGY

I have been working all winter trying to figure out free energy production. I will not bore you with all my devices that did not work, just present the real deal.

The concept is to align a coil of wire to create current in harmony with the permanent magnets poles that is being used to induce flux into the coil. Instead of slowing down as we draw current, the magnet works in reverse, speeding up the motor as we pull current.

HERE IT IS

1 magnet must rotate in the center of a coil of wire. The poles of the magnet should face outward. The coil must be wound up so the magnet cuts through the coils. And the coil must be larger than the magnet, completely enclosing the magnet. If the magnet passes the edge of the coil- it does not work.

If you spin the magnet one way- the coil will resist rotation the entire time. But if you spin it the other way, the poles of the magnet and the field of the coil harmonize and work in unison.

## The Holy Grail! FREE Energy Method.

How to align a magnet and a coil to work in unions. No drag, and the magnet speeds up as you pull current.

No generator, timing circuits, or anything complex is needed. A magnet needs to spin inside a coil in the correct orientation. That’s it. All you need to do is get the magnet up to speed to generate a flux field in the coil strong enough to affect the magnet- then it runs itself under load. Open the circuit and the magnet stops spinning.

If you generate a magnetic field around another magnetic field (without exiting that field) you can get the magnetic fields to work for or against you.  All the laws are based on exiting one field and entering into another.  But if you do all the action inside 1 field without exiting- those laws no longer always hold true.

Don’t believe me? Get out your O-scope and verify which way the current flows. Follow my outline precisely. Or build the thing…

I am distributing this info free of charge for a better world. If you are appreciative of my work, please throw me a bone..

PS. If you think I am lying and just copied this info from somewhere- see my Youtube channel which is littered with some of my attempts while researching. https://www.youtube.com/user/floodrod/videos

PS#2. I am not claiming to be the first person to discover this. There is 1 video on Youtube hinting at it- leading you towards the answer.

If you want to understand it fully- study this pic.

MAGNET CAN NOT PASS EDGE OF COIL